| Electric Heaters |
|
|
|
|
 |
|
Flanged Immersion |
|
Flanged immersion heaters offer proven high
quality design and manufacturing. With a large selection of tubular
elements in stock, we can provide quick delivery on our catalog flange
heaters with various ratings and terminal housing options. Available
in steel, copper, stainless steel, and Incoloy. Thermocouples available
for overtemp and process measurement. Flange sizes from 3" to
24". |
| |
|
|
|
|
 |
|
Large Screwplug Immersion |
|
Over 2200 configurations with 0.1kW - 68kW capacity
and 1" - 2.5" NPT plug sizes. Available in steel, copper,
stainless steel, Incoloy and titanium. General Purpose, Moisture Resistant,
and Explosion Proof enclosures. Integral thermostat models. |
| |
|
|
|
|
 |
|
Small Screwplug Immersion |
|
Screw-plug design incorporating stainless steel
fittings and swedged cartridge heaters (1/2" NPT and 3/4"
NPT). General Purpose, Moisture Resistant, and Explosion Proof
enclosures.
|
| |
|
|
|
|
|
|
 |
|
Over-The-Side Immersion
|
|
Straight (L) and circular heating element bundles
(LC) available. Moisture Resistant and Explosion Proof enclosures.
|
| |
|
|
|
|
 |
|
Over-The-Side Immersion |
|
Heated section (“B” dimension)
at tank bottom to allow natural heat convection. All wetted parts
durably constructed of the same material for optimum corrosion resistance.
Preset temperature sensor encased in a thermowell, standard on all
models. 1" sludge legs standard, longer sludge legs available.
Optional NEMA 4 or explosion resistant junction box available
|
| |
|
|
|
|
 |
|
Over-The-Side Immersion |
|
Lightest per KW of any heater on the market.
Lowest watt density rating to reduce build-up and prolong heater
life. Electropolish available to reduce corrosion. Preset over-temperature
sensor standard. Moisture resistant junction box fully welded.
|
| |
|
|
|
|
 |
|
Quartz Tube Immersion |
|
Available in single and three tube over-the-side
models and L-shaped models. For chemical and corrosive solutions.
For all acid solutions except those containing hydrofluoric or fluorides.
|
| |
|
|
|
|
 |
|
Teflon Sleeved Immersion |
|
Available in single and three tube over-the-side
models and L-shaped models. For chemical and corrosive solutions.
|
| |
|
|
|
|
|
|
 |
|
Flanged Circulation |
|
Air or liquid inline heating units with capacities
of 1 kW - 1200 kW. High temperature capability. Multi-Stages and skid
mounting with integrated control panels available. General Purpose,
Moisture Resistant, and Explosion Proof enclosures.
|
| |
|
|
|
|
 |
|
Screwplug Circulation |
|
Lower kilowatt ratings than flange models. Air
or liquid inline heating units. Skid mounting with integrated control
panels available. General Purpose, Moisture Resistant, and Explosion
Proof enclosures. Integral thermostat models. |
| |
|
|
|
|
|
|
 |
|
Band Heaters |
|
High temperature oxidation resistant metal
sheath. Highest grade mica insulation provides excellent electrical
insulation at high temperatures and is resistant to moisture. Clamping
band is low thermal expansion stainless steel construction to maintain
clamping pressure at elevated temperatures. Nickel/Chromium resistance
wire is evenly wound for uniform heat distribution and reliable
accuracy. Standard 10" fiberglass lead wires provide protection
up to 850°F. Approximately 1/8" thick
Custom sizes and lead wire configurations available.
|
| |
|
|
|
|
 |
|
Cartridge Heaters |
|
Used for heating metal parts, platens,
molds, dies, and fixtures. Diameters of 1/4" - 1" and
lengths from 1" - 24" in stock. Threaded fittings available.
Custom sizes and lead wire configurations available.
|
| |
|
|
|
|
 |
|
Enclosure Heaters |
|
Suitable for maintaining temperature and eliminating
moisture problems inside instrument enclosures, electrical enclosures,
fire extinguisher cabinets, and clothes lockers. Screw in base. |
| |
|
|
|
|
 |
|
Enclosure Strip Heaters |
|
Silicone rubber heater mounted to an
aluminum plate to dissipate heat and simplify installation. Suitable
for maintaining temperature and eliminating moisture problems inside
instrument enclosures, electrical enclosures, fire extinguisher
cabinets, and clothes locker.
|
| |
|
|
|
|
 |
|
Strip Heaters |
|
Surface mounted heaters strips suitable
for platens, tanks, enclosure heating and air heating. MGO filled
for high temperature or Mica strip for low to medium temperatures.
Several sizes available.
|
| |
|
|
|
|
 |
|
Ring and Disc Heaters |
|
Surface mounted heaters in round disc suitable
for platens, tanks, enclosure heating and air heating. MGO filled
for high temperature or Mica strip for low to medium temperatures.
Several sizes available. |
| |
|
|
|
|
 |
|
Tubular Heaters |
|
Most popular type of resistance heater used
to heat liquids, air and solids. Straight or bent to order for your
application. Different sizes, wattages and voltages available. |
| |
|
|
|
|
|
|
|
|
Pipe Duct Heaters |
|
Designed for normal recirculating air
applications where optimum air flow characteristics are desired. Incoloy
800 sheath heating elements, integral type K thermocouple, modular
element configurations for versatility.
|
| |
|
|
|
|
 |
|
High Temperature Duct Heaters |
|
Commonly used to replace existing process
air heaters, where dimensions are fixed and the assembly must fit
an existing space. Incoloy 800 sheath heating elements, integral type
K thermocouple, insulated terminal housing
|
| |
|
|
|
|
 |
|
CAB / CABB Series Finned Strip Duct Heaters
|
|
Simple Duct Transition Sections may be used
to adapt standard heater sizes to various duct sizes to increase air
velocities for better heat transfer, lower sheath temperature and
longer element life. Sizes in 6 kW to 100 kW. |
| |
|
|
|
|
|
|
 |
|
FS Radiant Heater |
|
FS heaters are high efficiency, fast response,
medium wavelength infrared heaters designed for use in general industrial
process heating applications such as paint curing, plastics, preheating,
web drying and curing, etc. Efficiencies exceeding 89% have been
proven, the highest in the industry. Width from 6" to 18"
with lengths from 12" to 24 ft.
|
| |
|
|
|
|
 |
|
Series 40 Radiant Heater |
|
Medium wavelength infrared strip heaters
designed for general industrial heating application. Operates at
temperatures up to 1500 F (2.6 micron-peak). Lengths from 14"
to 122" with 2.75" width.
|
| |
|
|
|
|
 |
|
Series CB Radiant Heaters |
|
Efficient, long to medium wavelength infrared
panel heaters designed for rugged industrial heating applications
requiring excellent uniformity. Operates at surface temperatures
up to 1350 F(2.9 micron-peak). Width from 6" to 24" with
lengths from 12" to 72".
|
| |
|
|
|
|
 |
|
Aluminum Extruded Radiant Heaters |
|
ALuminum extrusion makes for a strong
housing allowing multiple heaters to be assembled close together.
Available with quartz tube elements or metal sheath elements. 14"
to 84" in length.
|
| |
|
|
|
|
 |
|
Type T3 Lamps |
|
Type T3 lamps utilize a low mass tungsten
filament to provide a high temperature source that responds rapidly
to voltage changes, thereby allowing precise control in steady-state
or dynamic situations. Lamps are hermetically sealed and filled
with an inert gas. The temperature of a T3 lamp operating at full
voltage is approximately 4000ºF making its peak energy wavelength
1.15 microns. These lamps are available in several lighted lengths
with wattage ratings of 100-200 watts per linear inch.
|
| |
|
|
|
|
 |
|
Quartz Element |
|
Fast responding and a very efficient
source of radiant energy. With heat-up capabilities of 45 to 50
seconds, and complete cool down in approximately 15 seconds, this
is an ideal heating device for use in applications where frequent
line stoppage is expected or immediate heat-up and cool down is
essential. Available in lengths of 8" to 100", diameters
of 3/8", 1/2" and 5/8".
|
| |
|
|
|
|
|
|
 |
|
High Temperature Wire 500F |
|
Thermoline 125 high temperature, single conductor
wire. Flexible stranded nickel-coated copper conductor with PTFE
Teflon tapes covered by wrapped fiberglass yarns. A fiberglass braid
jacket is applied over the insulation and is treated with high temp
saturate. Excellent electrical properties. Withstands repeated flexing
and severe mechanical abuse. Moisture resistant and chemically inert.
UL & CSA approved for 600V, 482°F (250°C). Available
in 16, 14, 12, 10 and 8 AWG.
|
| |
|
|
|
|
|
|
High Temperature Wire 1200F |
|
Thermoline 150 Ultra high temperature, single
conductor wire. Flexible stranded 27% nickel-coated copper conductor
insulated with glass reinforced mica tapes. A fiberglass braid jacket
is applied over the insulation and is treated with high temp saturant.
Superior electrical properties. Excellent mechanical protection. Superior
high temp resistance. Flexible stranding. Nickel coated strands prevent
oxidation. UL & CSA approved for 600V, 842°F (450°C).
Available in 16, 14, 12, 10 and 8 AWG. |
| |
|
|
|
|
 |
|
Fiberglass Sleeving |
|
Closely woven 100% fiberglass construction for
applications where temperatures run as high as 1200°F and provides
abrasion resistance with high flexibility. The sleeving is "double
wall" for additional space factor dielectric strength. The dielectric
strength of this sleeving is only that of the air space created by
the presence of the sleeving. The material is rated FR-1 for flame
resistant properties. Available in 0.133" ID and 0.263"
ID. |
| |
|
|
|
|
 |
|
Ringlet Connector |
|
Ringlet connectors nickel plated rated
at 900°F. Ring will accept a No. 10 Stud. Comes in 3 wire sizes,
10-12, 14-16 and 18-22 AWG.
|
| |
|
|
|
|
 |
|
Splice Connector |
|
Splice connectors are nickel plated and are
rated at 900°F. Comes in 10-12 and 14-16 AWG. |
| |
|
|
|
|
 |
|
Ceramic Wire Nuts |
|
Ceramic wire connectors with water absorption
less than .005. Rated at 300V and 2000°F. Comes in wire size 10-12,
14-16, 16-18 and 18-22 AWG. |
| |
|
|
|
|
 |
|
Release and Heat Transfer Agent |
|
Release and heat transfer agent improves cartridge
heater performance in holes and eases removal. Also good for surface
type heaters such as strip heaters and tubulars when mounted in a
channel. Comes in a 4 oz. bottle with dauber in cap.
|
| |
|
|
|
|
 |
|
Fiberglass Tape |
|
Fiberglass Cloth Tape 108 ft/roll, one inch
wide. A high-temperature tape with a temperature range of -100 to
500°F, If the adhesive should burn out, it leaves a non-conductive
ash. Useful in all kinds of high temperature applications. |
