|
|
|
 |
|
|
|
|
 |
|
MUH Series Forced Air
Heaters |
|
Unit mounts either horizontally or vertically. Totally versatile.
For factories, warehouses, garages, stores, shipping rooms,
power stations, aircraft hangers, etc. Can be used for primary,
supplemental, spot or dual-system heating. Sizes in 3 kW to
50 kW.
|
| |
|
|
|
|
 |
|
LUH / KUH Series Forced
Air Heaters |
|
Unit mounts either horizontally or vertically. Totally versatile.
For factories, warehouses, garages, stores, shipping rooms,
power stations, aircraft hangers, etc. Can be used for primary,
supplemental, spot or dual-system heating. Sizes in 2.6 kW
to 45 kW.
|
| |
|
|
|
|
 |
|
CXH / GUX Explosion
Proof Forced Air Heaters |
|
Explosion proof unit heaters are designed to heat areas classified
as hazardous locations designated as Class I, Group C &
D Division 1 & 2 or Class II, Groups E, F and G with a
T3B ignition temperature code rating (329ºF, 165ºC)
or higher to provide primary or supplementary heating for
comfort or freeze protection. Typical applications involve
oil refineries, sewage treatment plants, petrochemical plants,
oil rigs, unattended pumping stations, chemical storage and
handling facilities, paint storage areas and countless other
hazardous areas covered by these classifications.
|
| |
|
|
|
|
 |
|
Corrosion Resistant
and Wash Down Forced Air Heaters |
|
JUW Series unit heater is designed
for comfort heating or freeze protection in non-hazardous
dusty/dirty environments including: waste water treatment
plants, coal handling areas, food processing plants, foundries,
steel mills, cement plants, car washes, swimming pool areas,
canneries and dairies. This unit offers both corrosion protection
in harsh environments and the ability to be hosed down for
cleaning.
|
| |
|
|
|
|
 |
|
UB Series Forced Air
Heaters |
|
For factories, warehouses, garages, stores, shipping rooms,
power stations, aircraft hangers, etc. Can be used for primary,
supplemental, spot or dual-system heating. Sizes in 2 kW to
50 kW.
|
| |
|
|
|
|
 |
|
VUH Series Vertical
Forced Air Heaters |
|
Versatile, high performance VUH heaters can be used for complete
primary, supplementary or dual system heating applications
in all types of commercial and industrial applications. They
direct warm air downward, and are particularly applicable
in high bay industrial buildings where columns, towering machinery
or warehouse stock would obstruct good horizontal movement
of air. Sizes in 5 kW to 50 kW.
|
| |
|
|
|
|
|
|
 |
|
ICG / CVEP Explosion
Proof Convection Heaters |
|
ICG Series convector heaters are designed to heat areas classified
as hazardous locations designated for Class I, Groups B, C
& D, Division 1 and 2 environments. Typical applications
involve petroleum refineries and gasoline storage and dispensing
areas, industrial firms that use flammable liquids in dip
tanks for parts cleaning, petrochemical companies manufacturing
chemicals, dry cleaning plants, utility and natural gas plants,
aircraft hangers, fueling areas and many other hazardous areas
covered by these classifications.
|
| |
|
|
|
|
 |
|
CU / CAL Cabinet Unit
Heaters |
|
Convection wall heater Used in offices, stores, schools,
churches, hospitals, dormitories, airport terminals, reception
rooms, entrance lobbies, corridors and stairways. 1.4 kW to
6 kW, 208 V to 480 V.
|
| |
|
|
|
|
|
|
 |
|
BRM / RBC Infrared Heaters
|
|
Designed to provide a rugged source
of heat for use in areas where dependence on air movement
is impractical. The heaters are versatile, designed to provide
warmth directly where it is needed for primary or spot heating
applications. Sizes in 1.5 kW to 13.5 kW.
|
| |
|
|
|
|
 |
|
ARL Portable Infrared
|
|
Heavy duty hairpin metal sheath heating element. UL and cUL
approved. 1.5, 2.0 & 4.5 KW heat outputs available. Voltages
include 120, 208, 240, 277, 480 & 600. Single phase operation
only. 1500 watt 120 volt model has attached cord and plug.
Sturdy base assembly provides tip resistant design.
|
| |
|
|
|
|
 |
|
AE / RAD / RADD Infrared
Heaters |
|
Complete, Ready-to-Connect Assembly available
in various lengths to accommodate work of varying dimensions.
Movable Mounting Clamps and Bolts are supplied to accommodate
many mounting configurations such as banks, tunnels and oven
sections. Sizes in .8 kW to 13 kW.
|
|
|
